Science research news Return to previous page
Article Released Tue-12th-February-2019 08:40 GMT
Contact: Carmen Cecile Denman Institution: King Abdullah University of Science and Technology
 Trouble on the surface begins with a wave of tiny bubbles

Rapid-fire photography reveals how even a nanoscale amount of surface roughness can unleash microbubbles that may interfere with coating technology.

The air entrapment under a drop impacting on a nano-rough surface.
The impact of drops onto a flat surface with a nanoparticle-based superhydrophobic coating has implications for industries that require ultradry surfaces, including coatings for ship hulls, to reduce friction and ultimately fuel consumption.
Copyright : Reproduced under a Creative Commons Attribution License 3.0 from reference 1 © 2018 KAUST
An air bubble breakup that may compromise the performance of droplet-derived coatings has been uncovered by a team led by Sigurdur Thoroddsen and his Ph.D. student Kenneth Langley at KAUST.

Understanding what happens to droplets when they splash onto solid surfaces is important for applications ranging from ordinary spray painting to inkjet printed circuits. One challenge arises from the air cushion that is trapped underneath the drop during initial contact. Within a fraction of a second, this gas can be compressed and cause the droplet to rebound or adhere poorly to the target.

From cameras that film at 5 million frames per second, the team’s images show how thick bands of microbubbles appear when water droplets strike surfaces that are only a few nanometers away from being completely flat.

“We see that microbubbles emerge after the drop starts spreading, which isn’t what we anticipated,” says Langley. “The speed at which some of these bubbles form is also surprising—once nucleated, they grow to their ultimate size in a microsecond or less.”

To unravel the mechanism of microbubble formation, the researchers used glass slides coated with a water-repelling film. Their time-resolved images demonstrated that the tiny bubbles appeared when the glass slide was coated with enough layers to produce rugged projections similar in size to the nanometer-scale air pocket.

“If your application is sensitive to air entrapment, such as organic LED displays, it’s important to make the surface as smooth as possible,” says Langley.

Associated links

Journal information

Langley, K. R., Li, E. Q., Vakarelski, I. U. & Thoroddsen, S. T. The air entrapment under a drop impacting on a nano-rough surface. Soft Matter, 14, 7586 (2018).

Keywords associated to this article:
Create Account...